Bong Joint Size Guide – How To Measure Your Joint Size & Gender

cream hemp

CBD For Pets


We have put together the simplest and easiest way to determine what size joint your bong is using just a penny. You don’t have to worry about finding a ruler just follow the next few steps and you will know instantly what measurement joint you have. The image above also helps you determine the bowl dimension utilizing a dime.

Need Help Identifying Ball Joint Size

It could have a tree, inline, showerhead, or honeycomb perc. If you already have a water pipe with tons of percs you’ll probably want only a basic ash catcher to collect ash that will not add any drag to your piece. If you’ve a primary water pipe and are looking for more diffusion than you will want an ash catcher with extra percs or more chambers. Most ash catchers are only one chamber but there are some that have two chambers that each contains percs for a lot extra added diffusion. Below is an example of a two-chamber ash catcher with several different percs and on the right is a fundamental ash catcher with one chamber and one perc.

A dime is slightly bigger than a 14mm joint, so try to place the dime on the joint, if doesn’t accommodate the dime, it’s likely a 14mm size joint. 10mm joint sizes are usually referred to as mini or nano joints as they are mostly found on smaller rigs and bongs. Although they’re quite rare to find, you can quickly identify them due to their tiny measurement. Female pipes, require you to insert the accessories into the joint and not over it. A female joint works best with male equipment so make sure you don’t buy feminine add-ons when you could have a female water pipe.

Everything You Need To Know About Glass Joint, Sizes, And Shapes

Although some glass pipes come with a bowl, nail, or both accessories, you may need to purchase new equipment at some point. You may also want to personalize your glass piece with an adapter. The next thing you need to consider is the angle of the joint on your ash catcher. Most ash catchers come in either 45 or 90 degree angles. The forty five or ninety degrees is referring to the angle at which your ash catcher will attach to your water pipe.

Male joints are principally found in oil rigs, however can also be seen on a few water pipes too. Once you have established whether your bong is male or feminine, you’ll be able to focus your attention on joint sizes.

They’re there to help you find exactly what you’re in search of. Our online store has all the standard joint sizes you require for all your smoking needs and many more accessories besides. Don’t be afraid to ask one of our on-line staff members to point you in the best direction. 10mm – This is often referred to as a micro or nano-joint and is mostly used on smaller rigs and pipes. Last but not least you should decide what kind of percolator you need your ash catcher to have.

The 18mm dimension joints are additionally common like the 14mm. They offer extra airflow and are meant for greater glasses like beakers or straight tubes. The greatest method to know an 18mm size joint is through the use of a dime. If the dime fits in, then you’re holding a glass pipe with an 18mm joint measurement.

Pcak Handmade Holder Glass Herb Bowl (18mm)

14mm joints are barely smaller than a dime, so if the dime doesn’t fit into it, the joint is most likely 14mm. If the joint issignificantlysmaller, though, you may have a 10mm joint in your hands. So lets say your brand new water pipe has a 14mm female joint, and you are on the lookout for a bowl to properly match it.

If you’ve a male jointed water pipe, no worries you possibly can always get a glass adapter to make it fit. Ash catchers range in price depending on the complexity of their design and dimension.

That’s right, your water pipe or bowl has a gender. Now technology hasn’t developed sufficiently for bongs to overcome the gender binary, however no matter. This is an important first bit of information to understand about your bong as it will help you to choose what pieces will connect to it.

If you see an ash catcher for like $10 chances are it’s very thin glass and will doubtless break sooner than later. Yes, your bowl, ash catcher, adapter, drop down, nail, pretty much any accessory, has a gender. Now with this being said, we can figure out if your pipe is a male or feminine. Another widespread joint size, 18mm joints are often only discovered on the largest bongs.

Third Party Lab Testing CBD


How To Smoke A Bong In 7 Simple Steps

That means length is measured from past the joint to the bottom of the glass piece. This is important to consider, since you need to make sure the end of the stem hits the water without hitting the underside base of your pipe. Smoke Cartel measures all downstems according to joint measurement and downstem size. Downstem length is all the time measured from the top of the ground joint to the tip of the downstem where the smoke is diffused. The average THC transfer rate for a joint is 20-26% while the average THC switch price for bongs came in at 40%.

CBD Lawsd Georgia

Thought On “How To Measure Foot Size For Boots (Step By Step)”

14mm joints are commonly found on small to medium water pipes. You can use a dime experiment to determine the size.

When someone says joint dimension, it refers to the diameter of the hole that your down-stem or bowl will match into. Joint sizes have changed fairly drastically over time to allow users to switch between totally different bowls, ash catchers, and other equipment. The first and most essential factor to know when determining the proper piece to buy is the joint gender. Bongs, bowls, nails, ash catchers, adapters, dropdowns, and all different bong parts have a gender, male or female. All you have to know is that male items go into feminine joints and female pieces go on top of male joints.

JustCBD Oil Tincture

This joint size is very common among standard water pipes, especially small to medium-sized ones. To see in case your joint measurement is 14mm, grab a dime and hold it over the tip of your pipe or bowl piece, whichever one is female.

Before you go purchase a new bong bowl or nail you need to know the joint dimension of your bong or dab rig. Bong joint sizes are available three completely different sizes, 10mm, 14mm or 18mm. The most common joint size is 14mm, you will rarely see 10mm joints and 18mm joints are normally solely discover on the biggest sized bongs. If you see anyone mention 14.5mm or 18.8mm joints don’t get confused these are the same as 14mm and 18mm joints. A male glass pipe wants an accessory of the opposite gender to work well so ensure all the accessories you buy for your male joint are feminine.

Depending on the angle of your water pipes stem you will have to determine which works finest for you. While these are the standards for smoking supplies, there are ways to change up each the gender and measurement of your favorite smoking device. Glass joints have become standardized so you can switch between different bong bowls, ashcatchers, and other equipment. We’ll give an overview on frequent glass joint sizes and shapes. It’s necessary that when you’re buying the attachments on your bong you know the specifications of your joint, so you’ll be able to apply the right adaptor.

Well, we will tell that if you smoke a .5 gram joint, you would only have to smoke a .25 gram bowl to intake the identical amount of THC. Hey guys, should you’re looking for a vaporizer, bong, Pipe or a dab pen, then you definitely’re at the proper spot! Now we’re not here to boast, but we’ve been serving the world with our extensive collection of products for 18 years. has sold over a million bongs, hand pipes and thousands upon hundreds of Vaporizers.

The picture below shows you how to determine what gender your bowl or bong joint is. This is very simple if your joint is male it’ll use the same sized female accessories.

CBD Third-Party Testing

If your joint is feminine, it’s going to use the identical sized male equipment. Unlike the joint gender that goes the other way, the joint dimension requires the same accent size. That is, if you have a glass pipe with a 14mm measurement joint, you’ll need to purchase an add-on accessory with a 14mm dimension. Discussion in ‘Bongs, Dab Rigs, Bubblers, Water Pipes’ started by thcfreak, Jun 30, 2011.

  • Ash catchers are optional water pipe upgrades and thus bought separately from the water pipe itself.
  • Ash catchers vary in worth relying on the complexity of their design and size.
  • To see in case your joint measurement is 14mm, seize a dime and maintain it over the end of your pipe or bowl piece, whichever one is female.
  • If you could have a male jointed water pipe, no worries you possibly can at all times get a glass adapter to make it fit.
  • This joint dimension is quite common amongst normal water pipes, particularly small to medium-sized ones.
  • Most ash catchers are male joints and meant to be combined with feminine jointed water pipes.

Quit Smoking with CBD Vapes

As previously mentioned the first thing you will want to look at is the joint size of your water pipe and the joint measurement of the ash catcher you wish to get. You must make sure that the joints will match collectively correctly so the ash catcher and your water pipe function correctly.

Does CBD affect memory?

You may want to think about purchasing a K – Clip to secure your ash catcher to your water pipe. A K-Clip is a small plastic clip that locks the ash catcher into your water pipe so it does not come out when removing the bowl. One of the most important benefits of using an ash catcher is you’ll spend a lot less time cleaning your water pipe and more time smoking out of it. Ash catchers attach to your bong to keep resin and ash from ending up in your bong water.

Popular Products And Brands


Just take a look at your glass piece and check if the bowl is placed onto the joint. Downstems are solely an option for pipes with female joints, since the downstem needs to be inserted into the joint. 18.8mm – This is reserved for the larger dab rings and glass water pipes. It is very common and very widely used across a number of brands and merchandise. Due to its large width, down-stems with an 18.8mm diameter will be much less likely to clog than their smaller counterparts.

You will want a male 14mm bowl for the items to be compatible. All in all, joint sizes will have to match up to be suitable, whereas the gender should be opposite.

The smoke will first travel through the ash catcher, which is designed to capture debris before it dirties your glass pipe, and your lugs. Even when you buy the wrong accessories or bowl pieces, or simply need to use your equipment on all of your items, you can always purchase adapters. This is when it’s important to know about the joint gender and dimension of your smoking provides. As you’ll be able to see in the picture above, the penny goes down about halfway on the 18mm feminine joint. The penny test is the easiest approach to measure the glass joint, and decide what size your bong joint is.


Ash catchers are optionally available water pipe upgrades and thus offered individually from the water pipe itself. Most ash catchers are male joints and meant to be mixed with female jointed water pipes.

Now that we know what an ash catcher is, it’s easy to explain why to use one. Have you ever noticed how dirty your water pipe gets after smoking? This not only makes your beautiful glass bong ugly, it also makes it smell very bad.

Standard water pipes for dry herbs are largely feminine. If you have the money to spend, an ash catcher is a must have accent for any water pipe. It will surely make your smoking experience extra enjoyable and will definitely make cleansing your bong method easier.

So if your bong has a female joint you will need to buy a male jointed bowl or dab nail and vice versa. Since you now understand the difference between a male and a feminine pipe, the subsequent essential thing to know is joint sizes. Glass joints include totally different sizes so that you can easily use completely different bowls, nails, and different add-ons. There are many reasons why it’s necessary to know concerning the sizes and genders of your smoking piece. It will determine the accessories that can work on it and how much you possibly can smoke at a time.

Raw Rolling Tray Small Bundle With Raw 110mm Roller And Raw King Size Supreme Rolling Papers

Almost all small-medium sized bongs and dab rigs have 14mm joints. To find out in case your joint is a 14mm all you need is a dime.

So a male will solely connect with a female, and vice versa. When you first venture into the glass world, there are components that may come throughout as confusing. These are the questions I had when buying my first piece. I’m right here to shed some light on these questions for you.

We literally get customers sharing stories of how their parents used to purchase online from us. For anybody who needs it we have a dedicated on-line customer service available 24 hours a day.

When shopping for equipment in your bong, such as extra bowls, nails, or ashcatchers, know the dimensions you’re in search of. You can’t squeeze a 18.8mm male nail into a 14.4mm feminine joint, and 10mm male bowls will not get a tight seal on a 18.8mm female joint. If you try any of these things anyways, you will not have a good time.

This is to increase airflow because the piece is much bigger. If a dime falls into your joint then you’ve an 18mm joint. 18mm or 19mm quartz bangers are good for big dab rigs, however these giant joints are discovered often in bongs. If you could have a giant new products bong that you wish to convert to a dab rig, most probably, you’ll get an 18mm or 19mm joint. Although there’s honestly no clear-cut means of figuring out whether or not your joint is a male or feminine, there’s a trick you can use.

Seoh Keck Clips Ground Joints Pp #29 Single Clip

A 14mm male bowl piece is about 3/4 of the scale of a dime whereas an 18mm male bowl piece is almost the entire measurement of a dime. There are three categories of joint sizes, and they are all measured in metric, regardless of the measurement system in your country. The water filters out larger particles, similar to toxins, within the smoke that you would have inhaled if you were smoking a joint. These include ash, tar and even the butane emission coming from your lighter.

Also very common, 18mm joint sizes are generally used on bigger devices like straight tubes or beakers. This dimension offers optimal air flow and can be identified utilizing a similar dime method. If you can fit a dime via the female joint of your pipe or bowl piece, it’s 18mm. You’ll see them in our Cheech & Chong Slide-Out Perc Rig as well as in this gorgeous Stained Rainbow Glass Beaker Dab Rig. They are simpler to seek out in smoke shops and the more than likely to get recommended should you don’t know your joint size.

Make sure you browse our selection of ash catchers to search out the perfect one for you. Most ash catchers range in value from $20 – $60 depending on the complexity of their design and colors. Cheaper is not all the time better especially when it comes to glass.

A Basic Guide To Glass On Glass Joint Sizes

Measure the glass joint measurement has at all times been a daunting task until now. With all of the different angles, sizes, and genders it can get a little complicated.

You know exactly the odor we are talking about when you’ve ever spilled a bong. What’s more, trying to smoke out of a dirty pipe can cause drag and cause percolators to get clogged.

If the dime is about the identical dimension as your joint its a 14mm. If the dime falls into the joint its an 18mm, and if the joint is far smaller than a dime you have a 10mm joint.

Your ash catcher will connect to your water pipe the same way you take your bowl in and out. Your bowl will now go into the ash catcher instead of directly into the water pipe. When you’re taking a hit bongs water pipes the burned ash will get trapped in the ash catcher as an alternative of passing into the water pipes main chamber. Be positive not to add too much water to your ash catcher or the soiled water will circulate into your water pipe.

A Comprehensive Quartz Banger Sizes Guide

For instance, your water pipe might have a 10mm male joint which means you’ll need a 10mm female bowl to be appropriate. Now that you have decided you want to add an ash catcher to your water pipe it’s important to ensure you get the best one!

Smoking and Ecigarettes